Badger Rings 306-24, .886, 30mm with 1" inserts
These rings have been designed specifically for the United States Armed Forces and are currently in use world wide. 1" ring reducers are included. In the early 1990’s Badger Ordnance identified the need for quality Tactical scope rings and mounts designed to meet the higher demands of the emerging Military and Law Enforcement tactical shooting community. Badger Scope Rings are machined from steel barstock as serialized matched pairs. This assures that both rings are identical and eliminates the damaging effects of mismatched mass produced rings. Maximized rings are designed to fit MIL STD 1913 (also called Picatinny) optical rails and are finished with Mil Spec Black Oxide. All the hardware on our rings was designed by us and is made to our specifications including the Torx® screws that hold the scope securely in the rings. The Maximized series of Scope Rings and Rails are made to the highest tolerances in the industry.
This item is not available for export outside the USA.
This item is not available for export outside the USA.
| 306-08 306-09 306-10 306-11 306-13 306-14 306-16 306-17 306-18 306-19 306-20 306-21 306-24 |
Standard High Ultra high MAX-50 Standard MAX-50 High 34mm dia. Schmidt&Bender Standard Alloy High Alloy Ultra high Alloy MAX-50 Standard Alloy Medium Medium high USMC M40A3 "Issue Item" |
.823" 1.125" 1.400" .823" 1.125" 1.000" .823" 1.125" 1.400" .823" .885" 1.00" .886" |
.232" .534" .809" .232" .534" .330" .232" .534" .809" .232" .294" .409" .293" |
7.3 oz. 9.5 oz. 10.7 oz. 11.3 oz. 15.2 oz. 8.6 oz. 3.9 oz. 4.6 oz. 5.1 oz. 5.5 oz. 7.8 oz. 8.7 oz. 8.9 oz. |
306-27 306-28 306-29 306-39 306-50 306-51 306-52 306-62 306-75 306-76 306-79 |
34mm High Alloy USMC DMR "Issue Item" USN EBR Alloy "Issue Item" USMC SASR "Issue Item" MAX-50 Ultra high MAX-50 Ultra high Alloy Medium Alloy Medium High 1 pc Ring Mount (3.375“ long) USMC M40A3 34mm “Issue Item” USMC SASR 34mm “Issue Item” Extra high Alloy |
1.275" 1.031" 1.25" 1.125 1.45" 1.45" .885" .885" 1.00" 1.49" 1.25" |
.605" .440" .659" .534" .859" .859" .294" .294" .330" .82" .659" |
4.1 oz. 12 oz. 4.3 oz. 12.5 oz. 17.5 oz. 8.5 oz. 3.9 oz. 4.6 oz. 11 oz. 16 oz. 5 oz. |
|
1 Review Hide Reviews Show Reviews
-
One of the Best
I actually have two of these sets, both ordered from Triad Tactical. They cinch down tight, and stay put. No worries about loose rings, or anything out of spec. I did use them with 30 mm tubes, so I can't speak to the fit of the 1" spacers. The only thing I don't care for is the amount of protective coating that comes on these. They'll keep for a long time in the package with no worries of corrosion, but man is it a pain to get off. Hose down with a decent brake cleaner 3 or 4 times; scrubbing in-between, and they're pretty much good to go. The captured cross bolt nuts are a nice touch.
