Borka Adjustable Torque Driver Kit

$155.00
(No reviews yet) Write a Review

Borka Adjustable Torque Driver Kit

Borka Adjustable Torque Driver Kit(ATD-1085) has a range of tightening torque adjustment from 10 inch-lbs. to 85 inch-lbs. in 1 inch-lb. increments. The ATD incorporates two ranges of adjustments, one low and one high. ATD-1085 low range is torque setting between 10 inch-lbs. and 29 inch-lbs., while high torque range provides adjustment from 30 inch-lbs. to 85 inch-lbs.  ATD operation is based on use of any one of the two pre-set "break-over" forces. These two forces, which correspond to low and high torque adjustment ranges, are user selectable by simply flipping the torque driver over, and applied at user adjustable distance between the center of the driver handle spherical notch (tightening force application spot) and the driver spindle axis of rotation. As soon as tightening force over pre-set distance exceeds selected torque value, driver handle disengages the driver arm lock and then pivots out of the way, effectively canceling further torque application and preventing over-tightening of the fastener. Compact and light weight (less than 6 ounces), rugged, highly consistent and accurate torque driver is of all metal construction and differs from traditional "slip clutch" and "cam-over" type torque limiting screwdrivers and wrenches by its simple and reliable design. In addition, all torque driver components are made from stainless steel, hard anodized aluminum, and chrome or zinc plated alloy steel. This choice of materials ensures sufficient degree of corrosion protection when torque driver is used outdoors.

KIT OPTIONS:

ATD-SBK (Small Bench Kit)
1. ATD-1085-CSA-MG adjustable torque driver
2. 2" long Autolock/magnetic bit holder (primary driver spindle)
3. 1/4" hex (male) drive to 1/4" square (male) drive adapter
4. 1/2" hex socket with 1/4" square drive
5. Compact 1/4" hex (F) drive ratchet handle
6. Total of 14 S2 alloy steel screwdriver bits:
    Hex, Inch: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Hex, Metric: 2.5 mm, 3 mm, 4 mm, 5 mm
    Torx: T-10, T-15, T25, T-30
7. Lockable PE-HD storage case with fitted case foam insert

EFK (Expanded Field Kit):

1. ATD-1085-CSA-MG adjustable torque driver
2. 2" long Autolock/magnetic bit holder (primary driver spindle)
3. 1/4" hex (female) drive to 1/4" square (female) drive adapter
4. 1/4" hex (male) drive to 1/4" square (male) drive adapter
5. 1/2" hex socket with 1/4" drive
6. 4" long extension, 1/4" square dr. (male) to 1/4" square dr. (female)
7. Compact 1/4" hex (F) drive ratchet handle
8. Total of 29hard chrome plated bits (S2 alloy steel) in two compact bit organizers:
    Hex, Inch: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Hex, Metric: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
    Torx: T-10, T-15, T-20, T25, T27, T-30
    Slotted: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16"
    Phillips: #1, #2
    Pozi: #1, #2.
9. Custom Cordura nylon case, with velcro closure, by TAB GEAR.

Important Borka LINKS:
Complete User Guide Sheet

Warranty and FAQ